Home >> Products >> Vacuum Pump >> 2BE Liquid Ring Vacuum Pump
  • 2BE Liquid ring vacuum pump
  • 2BE Liquid ring vacuum pump
  • 2BE Liquid ring vacuum pump
  • 2BE Liquid ring vacuum pump
  • 2BE Liquid ring vacuum pump
  • 2BE Liquid ring vacuum pump

2BE Liquid ring vacuum pump

The 2BE liquid ring vacuum pumps are displacement pumps of uncomplicated and robust construction with the following particular features: non-polluting due to nearly isothermal compression oil-free, as no lubrication in the working chamber handling of nearly all gases and vapours small quantities of entrained liquid can be handled easy maintenance and reliable operation low noise and nearly free fr
Share:
Product Description

2BE

CONSTRUCTION TYPE

The 2BE liquid ring vacuum pumps are displacement pumps of uncomplicated and robust construction with the following particular features:

non-polluting due to nearly isothermal compression

oil-free, as no lubrication in the working chamber

handling of nearly all gases and vapours

small quantities of entrained liquid can be handled

easy maintenance and reliable operation

low noise and nearly free from vibration

wide choice of material, therefore applicable nearly everywhere

shaft not contact with the medium

protection against cavitation as standard

incorporated dirt drain

incorporated central drain

no metallic contact of the rotating parts

The liquid ring vacuum pumps EMC 2BE are single-stage ones.


APPLICATION

Handling and exhausting of dry and humid gases; entrained liquid can be handled during normal duty. The pumps are applied in all fields where a pressure of 33 to 900 mbar must be created by robust vacuum pumps.


NOTE

During operation the pump must continuously be supplied with service liquid, normally water, in order to eliminate the heat resulting from the gas compression and to replenish the liquid ring, because part of the liquid is leaving the pump together with the gas. This liquid can be separated from the gas in a liquid separator (see catalogue part accessories).

It is possible to reuse the service liquid. The pumps are equipped with a device by which the contaminated service liquid can continuously be drained during operation (dirt drain), if necessary.

TYPEPower( Kw )Suc Cap (m³/h)Speed (rpm)Driving Modle
2BE1 153226001470Direct drive
2BE1 20222762970Direct drive

18.5580/672779/867V-belt drive
2BE1 203  301122970Direct drive

371122980Direct drive

30882/100279/867V-belt drive

3711001170V-belt drive
2BE1 252 451698740Direct drive

371200590V-belt drive

371500660V-belt drive

551848832V-belt drive

751998/2100885/938V-belt drive
2BE1 253 752448740Direct drive

451800590Direct drive

451800590V-belt drive

552142660V-belt drive

902868885V-belt drive

1103018938V-belt drive
2BE1 303 753198590Direct drive

1104002740Direct drive

552502466V-belt drive

753198583V-belt drive

903582657V-belt drive
2BE1 3531605298590Direct drive

1104400490Direct drive

753582390V-belt drive

903702415V-belt drive

1104098464V-belt drive

1324620520V-belt drive

1605200585V-belt drive

The operating data are applicable under the following conditions:

water vapour saturated air: 20°C

service liquid: - water: 15°C


Compression pressure 1013 mbar (atmospheric pressure)    ----38V/50HZ


Material design

HT200

SS304

SS316L

Pressure range:  33 to 1013 mbar

Suction volume flow:  600to 7500 m³/h


186 0046 5333 lutaohrb@163.com